*This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases.
Getting the right wheels for your car can be a challenge. Because of this, you might be tempted to try swapping wheels from the Camry to the Corolla.
After all, they look to be a similar size and shape. But will the wheels fit properly?
Most Camry tires and rims won’t be compatible with a Corolla. They won’t have the same bolt pattern so you won’t be able to move them from one car to the other.
If you don’t have the right wheels on your vehicle, it can cause big problems. The wheels will wear out quicker and it might bring the axle out of alignment.
Keep reading to learn more about the type of tires that your Corolla will require.
Will Camry Wheels Be Compatible With Another Car?
There are a few things that will determine whether your wheels from the Camry will be compatible with a different car. The first is the size of the tire.
This can give drivers hope as both the Camry and Corolla have the same size tires. They are both the same size, with the standard being 16 inches.
But, when it comes to the other elements, you will run into problems.
Next, you’ll need to consider the bolt pattern. This is the diameter of the wheel lugs. Often, the Camry tires will have 5 by 4.5. On the other hand, the Corolla will have a 5 by 100 mm. As a result, the wheels won’t be interchangeable.
There are a few other elements when trying to decide whether the wheels will fit the vehicle. These include:
- Center bore
- Wheel offset
- Size of the rim.
- Stud pattern
Finding The Right Type Of Tires For Your Corolla
The first thing that you need to decide is the type of tires you want to buy. This will often depend on the type of circumstances that you will be facing.
For example, if you are driving along slippery roads, it might be better to use snow tires, which will give you more grip.
The good news is that measuring your tires won’t be difficult. You just need to follow a few simple steps.
- Check the stud pattern. The good news is that the technical information required to fit the wheels properly will be listed in the owner’s manual. From there, you just need to make sure that it matches the type of wheels that you are purchasing.
- Measure the width. Most tires will have the width measured in millimeters. Sometimes, this number will also be followed by a J. The wider the wheels are, the better your grip on the road will be.
- Find the offset. The next number that you need to know is the offset value. This can be found by measuring from the back of the mounting pad to the lip. Then, divide the wheel width in half. Subtract the mounting pad number by the wheel number. Finally, you’ll need to round it into multiples of five. For example, you might find that you are getting a +15.
This should give you the basics. If you want more information, this guide goes into more depth about measuring up your wheels. Though you can also visit a professional, who will be able to fit your wheels for you.
This gives you the peace of mind that everything has been fitted properly.
Dangers Of Using The Wrong Size Wheel
You must make sure that the wheels are the right size for your vehicle. If they aren’t, you might end up doing a lot of damage to the car.
One of the biggest problems is the potential for excess wear on the tires. This means that you’ll need to spend a lot of money replacing them far more often.
Sometimes, the tires might rub against the inside of the wheel well. While this might be a fairly minor issue at first, it can do a lot of damage over the long term.
Sometimes, it might be enough to cause steering issues, which can make the car harder to control. Incorrectly sized tires might also cause some issues with the suspension system.
Another area to consider is the way that the wheels will affect your speedometer reading. Because of this, you might be invertedly speeding, with the gauge providing an inaccurate measurement of speed.
As a result, you could end up facing a lot of fines.
How To Change A Tire On A Corolla
Once you have found a wheel that fits your car properly, it’s time to put it onto the vehicle. The good news is that this is a fairly simple process.
You just need to follow these steps:
- Put on the parking brake. You don’t want the car to roll around while you are trying to change the tires. For extra security, you can use wheel chocks.
- Remove the wheel cap
- Loosen the lug nuts. Just give them a half-turn at this stage. You don’t want to remove them completely yet.
- Place the jack. You will need to be careful about where you are doing this. If it is in the wrong location, there is a risk that it can come through the floorboards. The owner’s manual will tell you where the jack will need to go.
- Raise the vehicle
- Remove the lug nuts
- Put on the new tire. The lug nuts should go through the holes in the tire.
- Tighten the nuts
- Lower the vehicles
- Tighten the nuts further
- Put the wheel cap into place
Modifying Your Car’s Rims
If you want to make your car stand out, it’s a good idea to modify the rims. This will allow you to experiment with plenty of styles.
For example, you might want to add spinners. These will keep moving, even once the car has come to a halt. Alternatively, you might want to paint the rim, adding a pop of color to your car.
Remember to do some measurements to make sure that the new rims will be compatible with your car. Once you have found the ones that you like, it’s time to add them to the vehicle.
Here are the steps that you will need to change the rims:
- Use a jack to raise the car
- Deflate the tires
- Use a socket to remove the fasteners that hold the existing rims in place.
- Use a tire lever to pull the rims off the tire.
- Attach the new rims, use a socket to make sure that they are held in place.
When you are driving the car, it’s important to use a high-quality set of tires. You don’t want it to break down on the side of the road.
Unfortunately, Camry wheels won’t fit on a Corolla. But, because of the popularity of this brand, it shouldn’t be too difficult to find tires and rims that will fit your car.
From there, it will be fairly easy to install them and get back on the road.