*This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases.
Engines need a clean combustion chamber to function properly, and while it is not possible to open up your engine to clean it every single time, you can use a good oil filter to get the job done. Take a look at the differences between two of the most popular oil filter options – Microgard and Wix.
Before we get into that you have to check out some of the latest car gadgets that you will love.
Microgard Oil Filters
Microgard filters are made by Purolator, which focuses on producing quality oil filters at competitive price points. These filters can be used for conventional and synthetic oils as it has a basic filtration system that provides you with suitable results for your daily use.
The filter is designed with metal and caps, and it has pleated papers that act as the filtration medium. Microgard also comes with a nitrile-based anti-drain back valve that keeps the oil from flowing out of the filter once the engine is switched off.
The Microgard can be used as a simple filter in normal driving conditions. This filter is designed to be suitable for use for driving in cities and on highways. The filter should be changed between every 3,000 and 5000 miles, which is quite a short distance in comparison to other filters. However, for a basic filtration system, it offers decent mileage.
A good micron rating is typically around 15 microns. At 29 microns, Microgard claims to have a 95 percent efficiency. In terms of engine protection, it does a decent job at keeping pollutants at bay. These filters are also designed to outperform the manufacturer’s expectations in order to provide additional protection for your engine.
Wix Oil Filters
Wix has been in the industry since 1939, when it rose to prominence due to its quality of vehicle accessories, including oil filters. The brand boasts high-performance products with some of the thickest filtering mediums in its interior that make it highly durable and suitable for engines of different capacities and capabilities.
These oil filters are suitable for working with different types of oils, including lubricating, hydraulic, or transmission oils, to protect your engine from all fronts. The filters have been specially designed to keep your engine free from contaminants, and they offer superior performance to drivers who enjoy driving on rough terrains.
Wix has a sophisticated dirt filtration system that allows your vehicle to be sufficiently lubricated, so it undergoes the optimal amount of combustion, even when you’re driving in the harshest environments. The filtration material is also synthetic, and it is fitted in a container that has a loaded base for picturing optimum flow of the oil to your engine while also being capable of holding 50% of the contaminants, which is a unique feature for this filter.
The filter is also built with valves that can be customized to suit your needs, and it also has a silicone-based anti-drain back valve that prevents the oil from draining when the engine is off.
The Difference Between Microgard and Wix Oil Filters
If you often travel over rugged terrain or in bad weather, not all oil filters will suit your needs. As a result, evaluating the operating parameters is also a method of evaluating the filter’s quality.
Microgard can boost all filtration and engine protection characteristics under regular driving situations, according to the manufacturer. Microgard’s filter is best used on city streets or motorways. When used in harsher settings, the product will give rise to limitations such as diminished filter performance and probable breakage.
The Wix Oil Filter, in contrast to Microgard, is ideal for big vehicles such as trucks and SUVs traveling through rugged terrain. The modifications that increase the product’s dust filtering effectiveness allow it to operate effectively even in the harshest road conditions.
The duration between when the filter was installed and when it needs to be replaced is generally determined using the actual miles covered by the vehicle.
The mileage of your car not only determines the filter’s lifespan but also determines when it should be replaced, while also allowing you to pay special attention and keep your engine’s combustion chamber free from contaminants.
If you opt for the Microgard Oil Filter, you’ll have to change the oil after 3,000 – 5,000 miles. On the other hand, the Wix Oil Filter offers a much longer duration between oil changes, which can range between 3,750 and 10,000 miles.
The filter’s construction material has a significant impact on the product’s quality and lifespan.
In Microgard, the main component is cellulose, which is large-fibered wood pulp. One of the main benefits of this substance is that it has the capacity to absorb water impurities effectively, hence extending the life of your oil and engine.
However, this material’s fibers are not only big but also inconsistent, which can result in a number of drawbacks during the filtration process.
Wix uses synthetic materials in its filter, the fibers are finer, and the pores are consistent in size. As a result, it should come as no surprise that this material can be a great material for filtering. Not only that, but because it’s a manufactured substance, you can ensure it provides superior dirt retention and can be used for a longer period of time.
Manufacturers often recommend certain engine oils to ensure your vehicle operates at maximum capacity, Which is also a factor in determining which oil filter you should select. The effectiveness of any oil filter is not only determined by its composition but also by the material it is filtering.
For this reason, if your vehicle uses conventional oil or traditional oils, we recommend using Microgard; however, if your vehicle runs on synthetic or mixed oils, Wix is a better alternative